Solar Cooking Archive Discussion Forums Forum Index Solar Cooking Archive Discussion Forums

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Pressure cooking in a Solar Oven?

 
Post new topic   Reply to topic    Solar Cooking Archive Discussion Forums Forum Index -> Technologies (Solar Cookers and Related)
View previous topic :: View next topic  
Author Message
terrysunderland



Joined: 22 Jan 2007
Posts: 5
Location: North East England

PostPosted: Tue Jan 23, 2007 8:13 am    Post subject: Pressure cooking in a Solar Oven? Reply with quote

Greetings! I live in North-East England, not the best part of the world to experiment with Solar Ovens! (It is snowing as I write). Anyway, I have had the germ of an idea. I wondered if pressure cooking would speed things up?
What I have in mind is the cheap, lightweight plastic type designed for microwave ovens, such as:
http://www.tvproducts4less.com/04-hwmmpc-12.html

I don't know if the pressure cooker would be placed inside the black pot, or painted black and used independently. Anyway, would some kind person, blessed with wall to wall sunshine, like to do the experiment? I would love to know if my idea has merit!
_________________
Cheers and Beers,
Terry in Sunderland, North East England.
Boroudah village, Bangladesh.

http://www.thewearsurmaclinic.com/
Back to top
View user's profile Send private message Send e-mail  
Bill Bradley



Joined: 26 Nov 2006
Posts: 21
Location: Springfield MA USA

PostPosted: Tue Jan 30, 2007 3:33 pm    Post subject: Pressure Cooker Reply with quote

Pressure cookers definately can be used with solar cookers. I have an old metal pressure cooker that I have been intending to test with solar cookers but haven't done it yet. I suspect that metal would work better than plastic because metal is a much better conductor of heat than plastic which is somewhat of a natural insulator. In the microwave oven, the energy enters the pot as microwave radiation and heat energy does not have to be concucted through the walls of the pressure cooker. The outside surface of the plastic would get much hotter than the inside of the plastic cooker. Even metal cookers may have plastic or wood handles that will not stand the heat

It would take a relatively powerful solar cooker to get the pressure cooker hot enough to pressurize it in a reasonably short length of time. Some of the less powerful cookers might not ever get the pressure cooker up to pressure. I don't know what pressure is used in pressure cookers, but according to steam tables, the contents would be about 227 degrees F at 5 pounds per sq in above ambient, and 239 degrees F at 10 pounds per sq in above ambient.

How you use the pressure cooker might depend upon the type of cooker you have. However, in most cases I would suggest painting the pressure cooker black and putting it directly in the cooker.
_________________
Bill Bradley, EarthboundTech
Back to top
View user's profile Send private message Visit poster's website  
terrysunderland



Joined: 22 Jan 2007
Posts: 5
Location: North East England

PostPosted: Tue Jan 30, 2007 3:51 pm    Post subject: Solar ovens Reply with quote

Hello, thanks for the interest.

I did have plastic pressure cookers in mind as possibly cheaper and more portable (lighter) for use in more remote locations such as Bangladesh, where I will be shortly.

Nice to know that somebody else has the same idea. Let us know how you progress!
_________________
Cheers and Beers,
Terry in Sunderland, North East England.
Boroudah village, Bangladesh.

http://www.thewearsurmaclinic.com/
Back to top
View user's profile Send private message Send e-mail  
alexkee



Joined: 12 Nov 2006
Posts: 3
Location: Malaysia

PostPosted: Thu Feb 01, 2007 3:21 pm    Post subject: Pressure Cooker & Solar Cooking Reply with quote

Back to first principles.

What's the workings of a pressure cooker?

Pressure to raise the temperature of boiling water above the atmospheric pressure where the pressure cooker is deployed.

This presupposes that you have access to a heat source that can raise the temperature of the liquid in the pressure cooker to a temperature that would otherwise be turned into latent heat from the change of state from liquid to gas (water to steam).

In a box or panel oven, it is unlikely that you would have enough surface area to capture enough solar energy in net balance against the lost to of captured solar heat to the ambient.

For a parabolic concentrator solar cooker with a sufficient collector-reflector surface area and good direct sunlight, it is more probable that there is enough harvested solar energy to fuel the pressure cooker to a higher than usual boiling point than using a usual utentsil.

Given the above, the deployment of a pressure cooker in circumstances where the solar fuel source is not sufficient to raise it to pressurized boiling point, the justification would be one of conservation and avoidance of the lost of heat to the ambient. Where the solar fuel source is strong, pressure cooking will help speed up cooking as it is with conventional fuel cooking paradigm.

Nothwithstandingly, the deployment of a dark outer surface pressure cooker even in conditions where solar energy may not be strong will always enhance performance, but always mitigated by the additional capital cost input vis-a-vis where just ordinary utensils where deployed.

Therefore where cost-benefit or price-performance comparison values are contextualized in the evaluation, pressure cookers in solar cooking scenarios may be indifferent to or inferior to usual cooking utensils.
_________________
The Sun, Humanity's Ultimate Equalizer


Last edited by alexkee on Fri Feb 02, 2007 5:30 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website  
Irenes



Joined: 02 Jun 2009
Posts: 2

PostPosted: Tue Jun 09, 2009 2:52 pm    Post subject: Reply with quote

I am quite new to solar cooking, but I could not imagine a plastic pressure cooker doing the trick. Are they not meant for microwave use only? Seems to me that the plastic would melt or deform considerably if exposed to such heat. Microwaves work differently and have very little affect on the temperature of most plastics. Correct me if I am wrong.

I recently conducted an interview on sous vide cooking - a relatively new cooking technique. The interview can be accessed from the right Featured Articles panel on Recipes Cookbook
- the cooking technique has similarities to pressure cooking, as food is cooked in a vacuum sealed bag. Do you think such a technique would work with a solar cooker? It would be interesting to combine the two.
Back to top
View user's profile Send private message  
SharonID



Joined: 24 Jun 2007
Posts: 74
Location: northern Idaho

PostPosted: Wed Sep 09, 2009 8:02 am    Post subject: Reply with quote

In case anyone is still interested in this topic, if I wanted to try pressure cooking and could afford it, I would try it with one of the lightweight black ones designed for camp use, such as the one here: http://www.campmor.com/outdoor/gear/Product___82051

I don't know anything about plastic pressure cookers, but I don't think they'd work well for solar, since plastic is not a particularly good heat conductor. I'm sure if I had one I could get one of the light black metal ones to work though, in any one of a number of my panel cookers, especially with a rigid 'greenhouse'. All you need is to get the water to boil—the special lid and valves, etc., take care of the rest. Once there is steam, pressure will build, and I know I can make steam.Smile

Regards,
SharonID
_________________
Idaho Regional Representative, International Women's Writing Guild
Visit the Guild at: http://www.iwwg.org/
Back to top
View user's profile Send private message Send e-mail Visit poster's website  
micsolaire



Joined: 03 Oct 2009
Posts: 7
Location: Lambesc (13) south France

PostPosted: Sat Oct 03, 2009 9:35 pm    Post subject: Reply with quote

Solar cooking with a pressure cooker is possible.



As you can see, I close vapor exit.

Temperature in my oven cannot exceed 150�C, so there is no danger to close the vapor exit.

http://micsolaire.aliceblogs.fr/blog/_archives/2008/5/21/3703663.html
Back to top
View user's profile Send private message Visit poster's website  
SharonID



Joined: 24 Jun 2007
Posts: 74
Location: northern Idaho

PostPosted: Sun Oct 04, 2009 1:02 am    Post subject: :!:Important Safety Information!! Reply with quote

micsolaire wrote:


As you can see, I close vapor exit.

Temperature in my oven cannot exceed 150�C, so there is no danger to close the vapor exit.

http://micsolaire.aliceblogs.fr/blog/_archives/2008/5/21/3703663.html


There is definitely danger, if you mean that you are completely blocking steam from escaping from your pressure cooker. Even the interior of a simple black, lidded pot can go much higher than the ambient temperature of the oven interior. The interior of a completely sealed pressure cooker could easily become pressurized enough to blow the lid right off when you try to open it, and possiblly pressurized enough to warp or blow in the oven, depending on the pressure cooker's materials/construction.

I believe that you are doing something that is potentially dangerous, and I'd hate for you or anyone else to get hurt.Sad It is never safe to completely block the outlet of steam from a pressure cooker, no matter what means of power you are using to cook with. If you get it hot enough to make steam (if you don't, then it won't pressure cook), it can build up enough steam and heat to be dangerous unless there is some way for a little steam to get out.

If you keep doing it despite this warning, please at least let it cool down for a long time before you try to open it or move it very much. I've seen what a blown cooker lid can do to a ceiling, and it isn't pretty. Fortunately there wasn't anyone between the cooker and the ceiling. Please be careful when pressure cooking and if you're going to err, let it always be on the side of caution.Cool

Regards,
SharonID
_________________
Idaho Regional Representative, International Women's Writing Guild
Visit the Guild at: http://www.iwwg.org/
Back to top
View user's profile Send private message Send e-mail Visit poster's website  
micsolaire



Joined: 03 Oct 2009
Posts: 7
Location: Lambesc (13) south France

PostPosted: Sun Oct 04, 2009 9:29 am    Post subject: Reply with quote

Don't worry, there is a security valve which opens when the inner pressure exceeds 2 bars.
In my oven temperature never exceeds 150�C and according to "loi de Mariotte" for the gas,

P x V = constant for the temperature and pressure of the test.


p is the pressure of the system.
V is the volume of the gas.

A balance will be established and steam will be contained since temperature is constant (150�C).

With this process, there is no more mist in the oven or on the glass during cooking.
Back to top
View user's profile Send private message Visit poster's website  
gaiatechnician



Joined: 06 Jan 2008
Posts: 32
Location: Victoria BC

PostPosted: Mon Oct 05, 2009 12:53 am    Post subject: Reply with quote

I do not think a 150 C reading means a whole lot. I think the sunlight beating down on the theremometer causes a lot of "Phantom" degrees to show. And even if the 150 C reading is a correct temperature, it is way too hot to be cooking food. autoclave temp is 121C or so. You need that temperature at the bottom of your pressure cooker to get enough pressure. Having 150 at the top does not mean you have pressure inside.
If you buy a probe and stick it into food, you will find a much lower temperature than is shown on the oven thermometer. Typically less than 100C.
Brian


micsolaire wrote:
Solar cooking with a pressure cooker is possible.



As you can see, I close vapor exit.

Temperature in my oven cannot exceed 150�C, so there is no danger to close the vapor exit.

http://micsolaire.aliceblogs.fr/blog/_archives/2008/5/21/3703663.html
Back to top
View user's profile Send private message Visit poster's website  
micsolaire



Joined: 03 Oct 2009
Posts: 7
Location: Lambesc (13) south France

PostPosted: Mon Oct 05, 2009 8:55 am    Post subject: Reply with quote

gaiatechnician wrote:
Having 150 at the top does not mean you have pressure inside.
If you buy a probe and stick it into food, you will find a much lower temperature than is shown on the oven thermometer. Typically less than 100C.
Brian


Brian, thanks for your participation,

I wanted above all to eliminate moisture inside the oven.
With a pot, moisture is too important and degrades the properties of the insulation.


_________________
Location : 43� 38.847 " N - 5� 15.9... E Alt : 242 m
Back to top
View user's profile Send private message Visit poster's website  
gaiatechnician



Joined: 06 Jan 2008
Posts: 32
Location: Victoria BC

PostPosted: Tue Oct 06, 2009 2:12 am    Post subject: Reply with quote

Yeah, but! you might be putting yourself in great danger if the pressure cooker explodes!
Why not just put the weight on the cooker and leave it at 15 pounds pressure? That should stop the steam until 120C inside the pressure cooker anyway. With a pressure cooker, you only get a lot of steam released when you turn up the heat, so amount of heat in is important. A solar cooker is only putting 300 or 400 watts in so there should be very little steam.
Have you tried that, just the weight on top?
micsolaire wrote:
gaiatechnician wrote:
Having 150 at the top does not mean you have pressure inside.
If you buy a probe and stick it into food, you will find a much lower temperature than is shown on the oven thermometer. Typically less than 100C.
Brian


Brian, thanks for your participation,

I wanted above all to eliminate moisture inside the oven.
With a pot, moisture is too important and degrades the properties of the insulation.

Back to top
View user's profile Send private message Visit poster's website  
micsolaire



Joined: 03 Oct 2009
Posts: 7
Location: Lambesc (13) south France

PostPosted: Wed Oct 07, 2009 3:03 pm    Post subject: Reply with quote

Brian,

Quote:
Why not just put the weight on the cooker and leave it at 15 pounds pressure?


I tried your solution it works : no moisture in the oven, but it was difficult to know what pressure I have in the cooker.

I made a lot of tests to know how to regulate pressure in the cooker.
I decide that pressure may not exceed 0,7 bar.






Now my cooker has 2 securities :
1- The central valve which opens at 0.7 bar (I shorten the spring which push the the ball who close the steam exit)
2- The security valve wich opens when pressure exceeds 2 bar.


_________________
Location : 43� 38.847 " N - 5� 15.9... E Alt : 242 m
Back to top
View user's profile Send private message Visit poster's website  
gaiatechnician



Joined: 06 Jan 2008
Posts: 32
Location: Victoria BC

PostPosted: Thu Oct 08, 2009 1:04 am    Post subject: Reply with quote

I am glad it works, hopefully it works in the oven too. (My pressure cooker loses a tiny bit of steam round the rubber seal.)
I admire your inventiveness.
Well done.
micsolaire wrote:
Brian,

Quote:
Why not just put the weight on the cooker and leave it at 15 pounds pressure?


I tried your solution it works : no moisture in the oven, but it was difficult to know what pressure I have in the cooker.

I made a lot of tests to know how to regulate pressure in the cooker.
I decide that pressure may not exceed 0,7 bar.






Now my cooker has 2 securities :
1- The central valve which opens at 0.7 bar (I shorten the spring which push the the ball who close the steam exit)
2- The security valve wich opens when pressure exceeds 2 bar.

Back to top
View user's profile Send private message Visit poster's website  
Display posts from previous:   
Post new topic   Reply to topic    Solar Cooking Archive Discussion Forums Forum Index -> Technologies (Solar Cookers and Related) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group